L Series PTO Shaft Lemon Tube L1 L2 L3 L4 L5 L6 L32

Regardless of what job you’ll be using a PTO shaft to complete, it’s important that you have the right size. The manufacturer should provide length recommendations to help you get an idea. When measuring a PTO shaft, use a tape measure and measure from the outside of each yoke to obtain the closed length. The series size should correspond with the amount of horsepower your tractor has. There are two different speeds used most commonly with tractor PTO shafts, the 540 (type 1) and 1000 (type 3) RPM.

Categories: ,

Description

L Series PTO Shaft Lemon Tube L1 L2 L3 L4 L5 L6 L32

 

L Series PTO Shaft

Series

540 tr./min 1000 tr./min MP(NM)
Kw Pk Nm Kw Pk Nm
L1 12 16 210 18 25 172 320
L2 15 21 270 23 31 220 450
L3 22 30 390 35 47 330 640
L4 26 35 460 40 55 380 780
L5 35 47 970 54 74 520 1050
L6 47 64 830 74 100 710 1450
L32 39 53 695 61 83 580 1200

Size Importance

Regardless of what job you’ll be using a PTO shaft to complete, it’s important that you have the right size. The manufacturer should provide length recommendations to help you get an idea. When measuring a PTO shaft, use a tape measure and measure from the outside of each yoke to obtain the closed length. The series size should correspond with the amount of horsepower your tractor has. There are two different speeds used most commonly with tractor PTO shafts, the 540 (type 1) and 1000 (type 3) RPM.

Part of PTO Shaft

Internal Yoke– There are two, located at both ends of the PTO shaft -tractor and implement. This is welded to the drive end.
Universal Joint– There are two, located at both ends of the PTO shaft.
External Yoke– There are two, located at both ends of the PTO shaft. It has a “Y” shape to connect to the U-joint and a female hole.
Safety Chains– The chains are used to secure the PTO shaft onto the equipment and onto the tractor.
Safety Shield– These cones are found on both ends.

L Series PTO Shaft

 

Series Cross Joint simple Splined yoke Tube yoke Tube
Outer Inner Outer Inner Outer Inner
1 2 3 4 5 6 7 8
L1 1.01
(22*54)
1.0505B+1.01+1.06L 1.0505B+1.01+1.07L 1.0505B 1.06L 1.07L 1.03L 1.04L
L2 2.01
(23.8*61.3)
2.0505B+2.01+2.06L 2.0505B+2.01+2.07L 2.0505B 2.06L 2.07L 4.03L 4.04L
L3 3.01
(27*74.6)
3.0505B+3.01+3.06L 3.0505B+3.01+3.07L 3.0505B 3.06L 3.07L
L4 4.01
(27*74.6)
4.0505B+4.01+4.06L 4.0505B+4.01+4.07L 4.0505B 4.06L 4.07L
L5 5.01
(30.2*80)
5.0505B+5.01+5.06L 5.0505B+5.01+5.07L 5.0505B 5.06L 5.07L 6.03L 6.04L
L6 6.01
(30.2*92)
6.0505B+6.01+6.06L 6.0505B+6.01+6.07L 6.0505B 6.06L 6.07L
L32 32.01
(32*76)
32.0505B+32.01+32.06L 32.0505B+32.01+32.07L 32.0505B 32.06L 32.07L

Lemon Tube

 

L Series PTO Shaft lemon tube

Without the PTO, a tractor cannot drive to complete its most basic of functions. Comprehending the different types of PTO shafts, parts, and their respective uses will allow for better practice with farm machinery. After all, you want an investment in the expensive and necessary equipment to last as long as possible.

How Does PTO Shaft Work?

L Series PTO Shaft
The Power Take-Off shaft transfers power from your tractor to the equipment of your choice. The PTO driveline is where everything that needs power on a tractor derives its power from. PTO drivelines are often overlooked during routine maintenance checks but should not be ignored as they are crucial in operating farm equipment.

Wear and Tear

When you’re operating agricultural equipment, there’s inevitably going to be wear and tear. Areas to watch out for this especially are with the yoke ears or sides that can be damaged from working excessively at angles. If the angle exceeds forty-five degrees, the PTO should be disengaged.

Telescoping tubing and sections can also experience excessive wear if lubrication is lacking where the tubes overlap. Insufficient lubrication can also cause undue wear on shield bearings. Without proper lubrication, the friction between these bearings is too great. They should be lubricated every eight hours.

Damaged or Broken Parts

It’s important to pay attention when things start to run less smoothly, or you find your attention on an area of the machinery that ordinarily runs smoothly. Damage to parts can happen anywhere from telescope tubes to cross-bearing arms, or joints to yokes. Be aware of the shock load on your equipment and make sure that you are using the right type of PTO for the job you are attempting to accomplish. Heavy-duty equipment can take a lot of stress, but it’s important to stop if something isn’t right before damaging beyond a simple fix.

PTO Shafts for Agricultural Gearboxes

A PTO shaft is an extremely sophisticated mechanism that allows implements to draw energy from an engine. It works with a mechanical agricultural gearbox. A PTO shaft can be mounted on a vehicle’s transmission and is an essential part of the system. A high-quality PTO shaft should be durable enough to withstand torsion and minimize vibration. Ever-power manufactures a wide range of durable PTO shafts to meet all your requirements.

PTO Shaft and Agricultural Gearbox

Why Choose China PTO Shaft

We are a manufacturer specializing in the production and export of PTO shafts. Enjoy a good reputation both domestically and internationally. My company has been focused on PTO shafts for nearly 10 years. Our production capacity is strong, with an annual output of over 200000 pieces.

Main production capacity
  1. Skilled in craftsmanship and operation, producing various structural forms of PTO shafts, including ordinary, internal and external threaded, 11Spline, 21Spline, GB standard, etc.
  2. The leading level of heat treatment ensures that the hardness of the PTO shaft is qualified, and the finished product has strong resistance to durable wear.
  3. Advanced surface treatment technology, customized for improving surface protection by galvanizing and anodizing the PTO shaft.
  4. Strict quality control system to ensure that products comply with national standards and specifications, with complete models.

As a supplier, we ensure that:

  • Fastest delivery time
  • Best price
  • Reliable after sales services
  • One to one customized solution.

If you need to purchase  China PTO shaft, please feel free to contact us at any time! Our team will provide you with high-quality products and dedicated services in the most professional way.