PTO Shaft for Supreme Feed Mixers 700T, 900T, 1000T, 1200T, 1400T, 1600T

Our PTO shaft can adapt to the feed mixers of these models of supreme: 700T, 900T, 1000T, 1200T, 1400T, 1600T

Tractors with power take-off (PTO) drive shafts to all types of PTO shaft-driven implements. When the implement’s PTO shaft engages the tractor’s PTO drive shaft, the shaft rotates 1000 times per minute. The PTO shaft provides mechanical operation power for the implement.

Description

PTO Shaft for Supreme Feed Mixers

Our PTO shaft can adapt to the feed mixers of these models of supreme: 700T, 900T, 1000T, 1200T, 1400T, 1600TPTO Shaft for Supreme Feed Mixers

Specifications of PTO Shaft for Supreme Feed Mixers

2580 series constant velocity features
1.375-21 CV Half Assembly  #4GYM240 Shield bearing  #961-3525
1.750-20 CV Half Assembly  #4GYM340  #93-26749 KB61/20 2500 Series shear bolt assembly  #4250105

PTO Shaft for Supreme Feed Mixers 700T, 900T, 1000T, 1200T, 1400T, 1600T

How Does the PTO Shaft Work?

PTO Shaft for Supreme Feed Mixers 700T, 900T, 1000T, 1200T, 1400T, 1600T

The tractor PTO shafts are created to generate and direct the engine power to the attachments and convert it into the engine rotation to hydraulic.

So, if the tractor PTO shafts use fluids in energy, the mechanism is called hydraulics.

Thus, you can effortlessly move various implement types and other components with less power. In other words, the tractor can not perform without the PTO shafts.

How to Remove a PTO Shaft?

How to Remove a PTO Shaft

Tractors with power take-off (PTO) drive shafts to all types of PTO shaft-driven implements. When the implement’s PTO shaft engages the tractor’s PTO drive shaft, the shaft rotates 1000 times per minute. The PTO shaft provides mechanical operation power for the implement. The male drive shaft on the tractor has splines that mate with the female drive shaft on the implement. The locking pin or button locks both together.

  1. The PTO shaft needs to be removed to disconnect the implement from the tractor.
  2. Place the vehicle transmission in PARK. Engage the parking brake and switch off the ignition key. Before climbing out of the vehicle, ensure the motor is not running by listening and checking your oil pressure gauge.
  3. Facing the back of the tractor, between the rear wheels. Check the connection position of the implemented PTO shaft to the PTO spindle on the tractor. You will see a safety cover covering the area.
  4. Reach under the safety shield and touch the implement coupling with your fingers. Locate the pin or button that locks the axle to the tractor. Press the button or pin with your thumb.
  5. Shake the shaft up and down, back and forth, until the PTO shaft is separated from the tractor’s PTO spindle.
  6. Loosen all safety chains that secure the shield on the axle to the tractor. The PTO shaft is now removed.

PTO Shafts for Agricultural Gearbox

Agricultural equipment includes a variety of PTO shafts. Each one is connected by yokes at each end and rotates between 540 and 1,000 rpm. A safety shield is commonly installed on both ends of a PTO shaft to protect the operator. These protective shields are also found in tractors and agricultural implements, and they ensure maximum efficiency. Added safety is also provided by the use of internal yokes.

The agricultural PTO gearbox is designed to change the output speed of a PTO drive shaft. It can be used as a decreasing or increasing ratio gearbox. With the decrease ratio gearbox, it reduces the PTO shaft’s speed from 1000 rpm to 540 rpm, allowing you to use equipment designed for 540 rpm. On the other hand, an increasing ratio gearbox increases the speed of the PTO shaft from 540 rpm to 1000 rpm. In addition to PTO shafts, we can also provide wholesale agricultural gearboxes. Contact us now to get more information!

PTO Shafts and Agricultural Gearbox