PTO Shaft for Krone BIGpack Square Balers 1290 1290HDP 1290XC 12130

Pto shaft is a rotating body with high speed and less support, so its dynamic balance is very important. Generally, the transmission shaft should be tested before leaving the factory and adjusted on the balancing machine. For the front engine rear wheel drive car, it is to transmit the rotation of the transmission to the shaft of the main reducer. It can be several joints, and the joints can be connected by universal joints.

Categories: ,

Description

PTO Shaft for Krone BIGpack Square Balers 1290 1290HDP 1290XC 12130

PTO Shaft for Krone BIGpack Square Balers

Krone BIGPack HDP Large Square Balers

Models : 890, 1270, 1290, 1290 HDP, 1290 XC, 12130 HDP, 12130 XC

Recommended: MAIN SHAFT : CAT 7/8 SFT SH series Constant Velocity

This Constant Velocity PTO will operate efficiently at 200 Horse Power and beyond @ 1000 RPMs.

PTO Shaft for Krone BIGpack Square Balers

For increased performance and life, order the splined version:

PTO Shaft for Krone BIGpack Square Balers

SH SERIES RL3 OVERRUNNING (some units)

PTO Shaft for Krone BIGpack Square Balers

About pto shaft

Pto shaft is a rotating body with high speed and less support, so its dynamic balance is very important. Generally, the transmission shaft should be tested before leaving the factory and adjusted on the balancing machine. For the front engine rear wheel drive car, it is to transmit the rotation of the transmission to the shaft of the main reducer. It can be several joints, and the joints can be connected by universal joints.

How to measure the parts of the PTO shaft

S Series PTO Shaft

Measuring the parts of the shaft correctly is essential for selecting the correct PTO series dimensions. Each product needs to be measured in a specific way to be consistent with the standard size. Follow these steps to ensure that the correct measurements are obtained and to order the parts required for the tractor.

1. Measuring axis
To measure the shaft, first make sure that the shaft is in the closed position, at which time the shaft is the smallest. Use a tape measure to record the length of the outside of each yoke. This measurement is the closing length. Use this measurement to find the correct series size for the tractor horsepower. Make sure you also know if there are shear pins, clutches, or splined implement ends.

2. Measure the universal joint
When measuring the universal joint, measure the length from one end to the other. You also need to record the width of one end of the universal joint. Use these numbers to find the correct size of the universal joint.

3. Put them together
You need to make the above two measurements in order to find the PTO shaft parts suitable for your tractor and work normally. You can use the PTO yoke size chart to get the correct size or use our convenient PTO series discovery tool.

Agricultural Gearbox and Agricultural PTO Shaft

The agricultural gearbox and PTO shaft are two parts of tractor. They work together to transmit power. The PTO shaft for the agricultural gearbox rotates at a speed of 540 to 1000 rpm. Both ends of the agricultural gearbox and PTO shaft are connected through a yoke. They may have higher or lower torque ratings depending on the application. As a mature supplier of agricultural machinery parts, we also provide various agricultural gearboxes for sale. Contact us now for more information!

PTO Shaft and Agricultural Gearbox